Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Trouble shooting
How to change the bulb
Should the light fail to work you can
change it as below:
Break the circuit of the appliance.
Press the rear hook (1) of the lampcover
by a screwdriver and at the same time
pull and rotate the cover in the direction
indicated by the arrow (2). So the bulb
can be replaced. (Bulb type: Osram
Halolux 230-240 V, 25 W, E 14 thread)
After changing the bulb replace the
cover, snap it in place and apply voltage
to the appliance.
If something does not work
During operation of the appliance some
smaller but annoying trouble can often
occur, which does not require calling a
technician out. In the following chart
information is given about them to avoid
unnecessary charges on service.
We draw your attention that operation of
appliance goes with certain sounds
(compressor- and circulating sound). This
is not trouble, but means normal
operation.
We draw it to your attention again
that the appliance operates
discontinuously, so the stopping
of compressor does not mean being no-
current. That is why you must not touch
All manuals and user guides at all-guides.com
the electrical parts of the appliance
before breaking the circuit.
electrolux 59
GB
Werbung
Inhaltsverzeichnis
Fehlerbehebung
