Installation Of The Carbon Filter; Door Reversal - Electrolux ENB 35405 S Benutzerinformation

64 electrolux
GB

Installation of the Carbon Filter

On delivery the carbon filter is in a plastic
bag to maintain it's duration and
characteristics. The filter should be
placed behind the flap before the
appliance is turned on.
1.Pull the flap outwards. (1)
2.Remove the filter from the plastic bag.
3. Insert the filter in the slot found in the
back of the flap cover (2).
4.Close the flap cover.
During operation, always keep the
air ventilation flap closed.
The filter should be handled
carefully so fragments do not
loosen from the surface.

Door reversal

Should the location demand it, the
opening direction of the door can be
changed.
The appliances are delivered with the
door opening to the right.
Carry out the steps as per the pictures
and the instructions.
We recommend that you have another
person to help you who can safely
hold the doors of the appliance
secure.
Disconnect the appliance from the
All manuals and user guides at all-guides.com
electrical supply.
Fig. 1
Open the door of the fridge, dismantle
the top cover (j) by removing the 2
screws (a), then close the door
(Fig. 2).
Move the panel (g) from one side of
the top cover (2) to the other (Fig. 2).
Fig.2
Unscrew the 2 screws (c), remove the
door mount at the top right-hand side
(d), and unscrew the screw on the
other side (c), remove the panel (b)
and place in an empty plastic bag.
Lift the fridge door up slightly and
remove.
Unscrew the screw (m), remove the
door stopper (h) and attach reversed
on the other side (Fig. 2).