Installation - Pkm Eb Gk4-R Bedienungsanleitung

All electrical connections which may be damaged
1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-
protection.
3. Check that the appliance and the power cord are not visible damaged.
4. Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
There must be a minimum distance of 100 mm
between the hole and the wall or adjoining
cupboard. If the hob is more than 30 mm
thick, or if it is placed on a false top, the
ventilation cover must be fitted as shown in
figure 1.

4. INSTALLATION

must be repaired by a qualified professional.
Unpacking and positioning
Installation / hob
1. Cutting the cupboard
WARNING!
28