Inhaltsverzeichnis
Werbung
COLOUR CHANGE (JUMPING)
In the colour change mode (Jumping Mode), the first 12 macro colours alternate in rapid succession. The speed of the program is adjustable sepa-
rately and a stroboscope effect can also be activated. Press the MODE button until "JUMPING" appears in the upper line of the display. Now, press
ENTER until the cursor appears in the lower line of the display, and then select the rate (SPEED) using the UP and DOWN buttons, with the colours
alternating from 00 to 99. Confirm with ENTER. The indicator in the bottom line of the display changes to "FLASH:xx". The cursor will appear in the
bottom line at the same time and you can activate the stroboscope effect using the UP and DOWN buttons and adjust the strobe frequency from 01
to 99 (FLASH:00 = strobe deactivated, FLASH:01 = approx. 1 Hz, FLASH:99 = approx. 20 Hz). Confirm with ENTER.
Colour change
Stroboscope
COLOUR FADING (FADING)
In the colour fading mode (fading mode) different colours are blended into one another in succession. The speed of the program is adjustable
separately and a stroboscope effect can also be activated. Press the MODE button repeatedly until "FADING" appears in the upper line of the display.
Now, press ENTER until the cursor appears in the lower line of the display, and then select the rate (SPEED) using the UP and DOWN buttons, with the
colours alternating from 00 to 99. Confirm with ENTER.
The indicator in the bottom line of the display changes to "FLASH:xx". The cursor will appear in the bottom line at the same time and you can
activate the stroboscope effect using the UP and DOWN buttons and adjust the strobe frequency from 01 to 99 (FLASH:00 = strobe deactivated,
FLASH:01 = approx. 1 Hz, FLASH:99 = approx. 20 Hz). Confirm with ENTER.
Colour fading
Stroboscope
AUTOMATIC CONTROL MODE (AUTO MODE)
Press the MODE button repeatedly until "AUTO MODE" appears on the display. In this operating mode, the light switches automatically between
colour change and colour blending mode. The speed of the individual colour blending or colour fading is determined by the settings of the respective
mode.
SLAVE-MODE (SLAVE MODE)
Press the MODE button repeatedly until "SLAVE MODE" appears on the display. Connect the DMX IN of the slave unit to the DMX OUT of the master
unit (same model) and activate one of the standalone modes in the master unit. Now the slave unit follows the master unit.
SELECTING THE DMX MODE (DMX CH MODE)
Press the MODE button repeatedly until "DMX MODE" appears in the upper line of the display. Press ENTER, and the cursor appears in the lower line
of the display and then use the UP and DOWN buttons to select one of the six DMX modes (02CH, 03CH1, 03CH2, 06CH, 09CH, 11CH). Confirm with
ENTER. You will find tables with the channels of the different DMX modes on the following pages of this manual.
DMX STARTING ADDRESS (DMX ADDR)
Press the MODE button repeatedly until "DMX ADDR" appears in the upper line of the display. Press ENTER, and the cursor appears in the lower line
of the display and then use the UP and DOWN buttons to select the desired DMX start address between 001 and 512. Confirm with ENTER.
18
Speed SPEED: 00 - 99
Speed FLASH: 00 - 99
Speed SPEED: 00 - 99
Speed FLASH: 00 - 99
Werbung
Inhaltsverzeichnis
