Inhaltsverzeichnis
Werbung
FR
Vous trouverez un choix complet de rallonges DMX certifiées IP65, de rallonges secteur certifiées IP65 et de câbles adaptateurs sur Internet, à
l'adresse www.cameolight.com.
ES
En la web www.cameolight.com encontrará los correspondientes cables de extensión DMX IP65, alargadores de alimentación IP65 y cables
adaptadores.
PL
Na stronie internetowej www.cameolight.com dostępny jest kompleksowy wybór przedłużaczy DMX, przedłużaczy sieciowych i kabli do
adapterów ze stopniem ochrony IP 65.
IT
Sul sito internet www.cameolight.com è reperibile un'ampia gamma di cavi di prolunga DMX IP65, cavi di prolunga di rete IP65 e cavi
adattatori.
OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
NOTE:
When the spotlight is properly connected to the mains, the following information appears successively on the display during the startup process:
"Update Wait ..." (only for service purposes), "WELCOME TO CAMEO" and the software version "V1.xx". After this operation, the spotlight is ready for
use and changes to the mode that was previously selected.
STATIC COLOUR (STATIC)
This mode offers the ability to separately adjust the intensity for each of the 6 LED groups and to generate an unlimited number of different colours
(colour mixing). Press the MODE button repeatedly until "STATIC" appears in the upper line of the display. By repeatedly pressing the ENTER button,
select the LED group for which you want to change the brightness level (please note the cursor in the display, Rxx = red, Gxx = green, Bxx = blue,
Wxx = white, Axx = amber, Uxx = UV / black light). Now you can set the intensity of the selected light from 00 to 99 using the UP and DOWN buttons
(examples: R00 = red at 0%, i.e. off. R99 = red at 100%, i.e. maximum brightness. Red at 100% and green at 100% result in a bright yellow).
Adjust the flash frequency of the strobe effect by pressing ENTER repeatedly until the cursor shows "Fxx". Now you can activate the strobe effect
using the UP and DOWN buttons and set the flash frequency from 01 to 99 (F00 = strobe effect deactivated, F01 = approx. 1 Hz, F99 = approx. 20
Hz). Confirm with ENTER.
Red
Intensity R00 - R99
Green
Intensity G00 - G99
Blue
Intensity B00 - B99
White
Intensity W00 - W99
Amber
Intensity A00 - A99
UV / BLACK LIGHT
Intensity U00 - U99
Stroboscope
Speed F00 - F99
COLOUR MACROS (MACRO)
In this mode, one of 15 colours can be selected as a preset. Press the MODE button repeatedly until "MACRO" appears in the upper line of the
display. Now press ENTER and then select one of the 15 colour presets using the UP and DOWN buttons. Confirm with ENTER.
MACRO 1
MACRO 2
Amber
MACRO 3
Yellow warm
MACRO 4
Yellow
MACRO 5
MACRO 6
Turquoise
MACRO 7
MACRO 8
Red
MACRO 9
MACRO 10
MACRO 11
MACRO 12
Green
MACRO 13
MACRO 14
Cyan
MACRO 15
Blue
Lavender
Mauve
Magenta
Pink
Warm White
White
Cold White
17
Werbung
Inhaltsverzeichnis
