Werbung
Verfügbare Sprachen
Verfügbare Sprachen
g Operating Instruction
After the batteries are installed, the LCD will turn on and beep for 2 seconds. The clock
will automatically search the radio signal. It takes about 3-5 minutes to finish this
process.
• If the radio signal is received, the date & time will be set automatically with radio
control signal icon turns on.
• If the clock fails to receive the time signal, it will be in Time/Alarm 1 display with the
icon turns off. Then user can set the time manually.
Selecting Alarm 1/ Alarm 2/ Dual time Display
• Press MODE will display the Alarm 1 time
• Press MODE again will display the Alarm 2 time
• Press MODE again will display the Dual time
Manual Time Setting
• Press and hold WAVE for 3 seconds: the hour digits are blinking and can be set by
pressing or
key. Press MODE to confirm settings and pass it on to next step.
• The minute digits are blinking and can be set by pressing or
Press MODE again to confirm settings and pass it on to next step.
• The year digits are blinking and can be set by pressing or
Press MODE again to confirm settings and pass it on to next step.
• The month digits are blinking and can be set by pressing or
Press MODE again to confirm settings and pass it on to next step.
• The date digits are blinking and can be set by pressing or
Press MODE one last time to confirm settings and return to the regular mode.
Note:
If no key is pressed within 30 seconds, it will exit the manual time setting mode and go
back to the time/ alarm time 1 without the date updated. During any setting mode, press
and hold or
key for 2 seconds for fast setting and releases it to confirm setting.
Calendar Setting
• To change the weekday display from one language to another language, press and
hold the
key for 3 seconds and the display will scroll as below:
for English
for Germa
for Spanish
for Dutch
• Releases the
key confirm settings.
6
00092632man_de_el_en_fr_nl_pl.indd 6-7
Downloaded from
www.Manualslib.com
key.
key.
key.
key.
for Italian
for French
for Swedish
manuals search engine
Alarm Time Setting
ALARM 1 setting
In Alarm 1 display,
• Press MODE for 3 seconds: the hour digits are blinking and can be set by pressing
or
key.
• Press MODE again: the minute digits are blinking and can be set by pressing
or
key.
• Press MODE again, the Alarm time is set and icon will be turned on.
ALARM 2 setting
In Alarm 2 display,
• Press MODE for about 3 seconds: the hour digits are blinking and can be set by
pressing or
key.
• Press MODE again: the minute digits are blinking and can be set by pressing
or
key.
• Press MODE again, the Alarm time is set and icon will be turned on.
Enable Alarm 1/Alarm 2:
• Press ALARM to enable ALARM 1 with icon turned on.
• Press ALARM again to enable ALARM 2 with icon turned on.
• Press ALARM again to enable both ALARM 1 and ALARM 2 with and icons
turned on.
• Press ALARM one last time to disable both ALARM 1 and ALARM 2 with
and icons turned off.
Activating the Alarm
When the ALARM 1/ ALARM 2 is on, the relative alarm icon and will be flashing.
• Press ALARM key to turn the alarm off
• Press LIGHT/SNOOZE button, alarm will be stopped and the backlight will be turned on
for 5 seconds with the repeat alarm indicator [Z
after 4 minutes.
Foreign Time Setting
• Press and hold key for 3 seconds, the icon will be turned on and enter into the
foreign time setting mode.
• Press and hold WAVE for 3 seconds, the hour digits of the foreign time display are
blinking and can be set by pressing or
• Press MODE key to confirm foreign time settings.
] flashing. The alarm will sound again
z
key.
7
04.02.13 09:37
Werbung
