Connecting The Power Cord (1) - Pioneer AVIC-X1 Installationsanleitung

Connecting the System

Connecting the power cord (1)

Note:
Depending on the kind of vehicle, the
function of 3* and 5* may be different.
In this case, be sure to connect 2* to 5*
and 4* to 3*.
1*
3*
5*
C a p ( 1 * )
When not using this terminal,
do not remove the cap.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
9
2*
4*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
Speaker leads
White:
White/black: Front left ≠
Grey:
Grey/black: Front right ≠
Green:
Green/black: Rear left ≠ or Subwoofer ≠
Violet:
Violet/black: Rear right ≠ or Subwoofer ≠
Connect leads of the same
colour to each other.
Fuse holder
Fuse resistor
Fuse resistor
Front left +
Front right +
Rear left + or Subwoofer +
Rear right + or Subwoofer +