Overview Of Remote Control Buttons - Sony KZ-32TS1E Bedienungsanleitung

Overview of Remote Control Buttons

VIDEO TV
!ª
/
1 2 3
4 5 6
7 8 9
!•
0
!¶
!§
!∞
OK
MENU REC
!¢
TV
VCR DVD
PROG
!£
!™
q; Media Selector: With this remote control you can operate not only this TV but also the main functions
of your VCR or DVD.
Switch on the device you want to operate and next press this button repeatedly to select the VCR, TV or
DVD. A green light will be lit momentarily.
An initial set up is required to synchronise this remote control to your VCR or DVD. It will depend on
the Brand of those products. For more details, refer to chapter "Remote Control Configuration for
VCR/DVD" on page 31.
qa Selecting channels: Press these buttons to select the next or previous channel.
qs Muting the Sound: Press this button to mute TV sound. Press again to restore the sound.
qd Adjusting TV volume: Press these buttons to adjust the volume of the TV.
qf Displaying the menu system: Press this button to display the menu on the TV screen. Press again to
remove the menu display from the TV screen.
qg Selecting TV mode: Press this button to switch off teletext or video input.
qh Selecting Sound effect: Press this button repeatedly to change the sound effect.
qj Selecting Picture mode: Press this button repeatedly to change the picture mode.
qk Displaying on-screen information: Press this button to display all on-screen indications. Press again
to cancel.
ql VCR or DVD on/off: Press this button to switch your VCR or DVD on or off.
Besides TV functions, all coloured buttons as well as green symbols are also used for
Teletext operations. For more details, please refer to the "Teletext" section on page 27 of this instruction
manual.
1 To Temporarily Switch Off TV: Press this button to temporarily switch
off the TV (the /
again to switch on the TV from standby mode.
1
To save energy we recommend switching off completely when TV is not in use.
2
After a certain period without a signal and without any button
being pressed, the TV switches automatically into standby mode
(Auto Shutoff, page 25).
3
2 Selecting input source: Press this button repeatedly until the desired
input symbol of the source appears on the TV screen.
4
3 Selecting channels: If Media Selector is switched on TV or VCR, press
5
this button to select channels.
For double-digit programme numbers, enter the second digit within 2.5
6
seconds.
7
4 a)If Media Selector button is switched on TV: Press this button to
watch the last channel selected (watched for at least 5 seconds).
8
b)If Media Selector button is switched on VCR: For Sony's VCR
double-digit programme numbers, e.g. 23, press -/- - first and then the
buttons 2 and 3.
9
5 This button only works in Teletext mode.
!º
6 Selecting screen format: Press this button repeatedly to change the
format of the screen. For more details, refer to chapter "Screen Control" on
!¡
page 16.
7 Selecting Teletext: Press this button to switch on Teletext.
8 a)If Media Selector is switched on TV:
When MENU is switched on, use these buttons to operate the menu
system. For details refer to "Introducing and Using the Menu System"
on page 13.
b)If Media Selector button is switched on VCR or DVD: Using
these buttons you can control the main functions of your VCR or DVD.
9 Recording button: If Media Selector is switched to VCR, press this
button to record programmes.
(standby/sleep) indicator on TV lights up). Press
GB
7
Overview