Overview Of The Remote Control Buttons - Sony KV-28FC60Z Bedienungsanleitung

Operation

Overview of the remote control buttons

To mute sound.
Press to mute TV sound. Press again to
restore the sound.
To return to TV mode.
Press to return to the normal operation
from teletext mode, video mode or
standby mode.
These buttons have no function.
To select Teletext
Press to select Teletext mode.
To select EPG
Press to display the Electronic Programme
Guide. Press again to remove display.
To freeze the picture.
Press to freeze the picture. Press again to
cancel freeze.
To select channels.
Press numbered buttons to select channels.
For double digit programme numbers, eg 23,
press -/-- first, then the buttons 2 and 3. If you
enter an incorrect first digit, this should be
corrected by entering another digit (0-9) and
then selecting -/-- button again to enter the
programme number of your choice.
To display sound menu.
Press repeatedly to select one of the
following equaliser modes : Personal,
Vocal, Jazz, Rock, Pop or Flat.
To display picture menu.
Press to change the picture settings. Press the
button to remove the display.
To adjust TV volume.
Press to adjust the volume of the TV.
To reset to factory-set levels.
Open the remote control lid and press to return
picture and sound settings to factory-set levels.
After the 'Installation' menu has appeared on
the TV screen, refer to the 'Selecting Language
and Country' section of the instruction manual
to change your choice of language and country
if desired.
VCR on/off button.
Press to temporarily switch off
VCR (if Sony VCR connected).
Press again to switch on VCR.
;
To temporarily switch off TV
Press to temporarily switch off TV. Press again
to switch on TV from standby mode.
NOTE: After 15 minutes without a TV signal
and without any button being pressed, the TV
switches automatically into standby mode.
To reveal channel information.
Press to reveal information on the channel you are
;
currently watching. Press the +
remove the display.
To select input signal or freeze teletext
Press to select inputs from the TV sockets (see Using
Optional Equipment section). In teletext mode,
press to freeze the displayed page. Press once again
to cancel.
To return to previous channel
Press to return to the previous channel you were
watching. Note: This can be done only after
watching the present channel for 5 seconds.
To change screen format.
Press to change the size of the screen.
This button can be used in Teletext mode only.
Please see Teletext section of manual for details.
To select menu items
Use this OK button to select options available in
the menu system of the TV.
To display the
Channel Table
Press the OK button to
8
display the channel
9
10
11
table. Push to $ or 4 to
12
13
select a channel then 14
"
push to to confirm.
To select channels.
Press to select channels.
To display the menu
Press if you wish to use the TV menu system. Press
again to remove the menu from the TV screen.
To display the time.
Open the remote control lid and press to display the
time on screen.
To operate video equipment
Open the remote control lid and press these buttons
to operate your video equipment (please refer to
your VCR manual).
button again to
VIVA Soul Music
RTL News
SAT 1 Game Show
S3 Animal Report
VIVA 2 Stones in Interviev
PRO 7 Pink Panther
ARD Afternoon Report
9