Using Optional Equipment; Input Signals - Sony KZ-32TS1E Bedienungsanleitung

Using Optional Equipment

1
Connect your equipment to the designated TV socket, as indicated on page 28.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the
correct input symbol appears on the screen.
Symbol

Input Signals

2 • Audio / video input signal through the Scart connector A.
1 or
• RGB input signal through the Scart connector A. This symbol appears only if
a RGB source has been connected.
• Audio / video input signal through the Scart connector B.
3
• S Video input signal through the Scart connector B.
3
S
• Video input signal through the phono socket D and Audio input signal
4
through C.
• S Video input signal through the S Video input jack E and Audio signal
4
S
through C.
5 • RGB input signal through the Y/G, P
jacks H, and Audio input signal through G.
• If your equipment is connected to the Scart connector
5 jacks, select the input signal format for the connected equipment by using "AV3
Input," "AV4 Input," or "AV5 Input" option in the "Features" menu (page 20).
• If your equipment is connected to the
RGB Mode in the "Features" menu (page 20).
4
Press the button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket and select
instructions above. Finally, refer to the "Sound Adjustment" section of this manual and select
"Dual Sound" "A" on the sound menu screen.
30
Additional Information
button repeatedly until the
/C /B, P /C /R jacks and HD, VD
B B R R
3/
5 jacks and outputs an RGB signal, select
4 or 4 input signal using the
S
, or 4/ 4, or
S S