Optional Equipment; Selecting An Input Signal - Sony KV-28FC60Z Bedienungsanleitung

Optional Equipment

You can connect a wide range of optional equipment to your TV set.

Selecting an input signal

In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the
connector, to which you have connected the device.
1
Press ... repeatedly on the remote control to select one of the following input modes:
Symbol on the screen
...1
...2
...3
* automatic detection of the signal according to the connected equipment
2
;
Press to return to the normal TV screen.
If the picture or sound is distorted, move the VCR away from the TV set.
When connecting a monaural VCR, connect only the white jack to both the TV set and the VCR.
Connect your DVD-player to Scart 2
For information on how to select the output signal of the Scart 2
D E F
1 1 2 S 2 3 S 3
G
R/D/D/D L/G/S/I
1 2
Input signals from Connector
Audio/Video from Scart connector D or* RGB from Scart connector D
Audio/Video from Scart connector E or* S-Video from Scart connector E
Audio/Video from the phono jacks A and B or from Scart connector F or* S-Video from
the 4-pin DIN connector C or from Scart connector F
2 E.
Y 2/ j
A B C
L/G
S/I
R/D
D/D
VHS
DVD
2 E, see page 16.
Y j
2/
23