Adjus�Ng The Focus Of The Mo�F; Rota�Ng The Mo�F - PHOS 45s pole mount pro Nutzungsinformation

3. Release and remove the two cylinder head screws.
4. Rotate the stop by 180° so that the lug is on the other
side, but facing the projector head again.
5. Fix the stop in place with the two cylinder head screws.
4.4. Adjus�ng the focus of the mo�f
1. Loosen the knurled screw.
2. Move the projec�on lens within the holder un�l the
mo�f is in focus.
3. Tighten the knurled screw.
4.5. Rota�ng the mo�f
1. Loosen the knurled screw un�l the gobo holder can be
rotated.
2. Rotate the gobo holder un�l the mo�f has been
aligned as desired.
3. Tighten the knurled screw.
PHOS s pole mount pro
Se�ngs
41 / 76