Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety instruc�ons
1.1. General understanding of safety
This LED projector is safely constructed and complies with
the legal requirements for product safety. The following
safety instruc�ons are intended to help you assess remain-
ing risks in order to avoid possible damage to property or
personal injury. Consider this informa�on for use as an in-
tegral part of the product. Keep this document in a safe
place for future reference. Only pass the projector on to
others together with this document. It provides important
informa�on required for safely working with the product.
Please read the informa�on for use carefully before in-
stalling and using the LED projector. Read the 'Safety in-
struc�ons' chapter in detail and fully familiarise yourself
with it. Always observe the instruc�ons provided in the in-
forma�on for use for all work carried out. Any prevailing
regula�ons on accident preven�on and environmental pro-
tec�on, as well as any recognised technical rules governing
safe and proper work, must also be observed. Competent
handling and careful maintenance have a significant impact
on the performance and availability of your projector. In-
stalla�on and opera�ng errors, as well as inadequate main-
tenance, lead to avoidable opera�onal malfunc�ons and
breakdowns.
1.2. Intended use
PHOS s pole mount is a compact LED projector (hereina�er
referred to as "projector") for displaying graphics and text
by light projec�on.
•
The projector is suitable for use in humid environ-
ments and for outdoor use.
•
The projector is not suitable for corrosive environ-
ments (e.g. factory farming, swimming pools, tunnels,
offshore installa�ons, coastal areas up to 1 km / 0.6
miles from the sea).
•
The ambient temperature should not exceed 35°C /
95°F, otherwise the projector cannot be cooled suffi-
ciently and electronic components may fail prema-
turely.
•
The projector is only suitable for use with projec�on
mo�fs made of glass, otherwise known as 'gobos'. Do
not insert any other projec�on mo�fs or objects in the
projector! Unsuitable projec�on mo�fs can damage
the projector and cause a fire.
26 / 76
Safety instruc�ons
•
When using the projector, make sure that no people
are blinded by the bright beam of light, especially if
there is a safety risk posed by temporary glare (e.g. for
road users, people using stairs, etc.).
•
The projector must not be handled by children or per-
sons with cogni�ve impairment. Children or cog-
ni�vely impaired people must always be supervised by
a responsible person in the proximity of the projector.
•
Do not modify or dismantle the projector. Otherwise,
it may no longer meet the safety requirements. Users
may only perform the ac�ons described in this inform-
a�on for use. Repairs may only be carried out by com-
petent service technicians.
•
The manufacturer does not accept any liability for
damage caused by improper use or assembly.
1.3. Danger of electric shock
Contact with mains voltage poses a risk of fatal electrocu-
�on.
•
Only allow a qualified electrician to carry out electrical
connec�ons.
•
The projector is a Class I electrical device in accordance
with IEC 61140. Ensure that the device is properly
grounded via the electrical connec�on.
•
Make sure to observe na�onal regula�ons governing
the opera�on of electrical devices.
•
Before carrying out any electrical work, disconnect the
projector from the mains and secure it against unau-
thorised reconnec�on.
•
The connec�on cable must not be damaged. Avoid pla-
cing loads on the connec�on cable. Do not bend, pull,
twist or pinch the connec�on cable. Do not mount the
projector in a loca�on where people can step on the
connec�on cable. A damaged connec�on cable can
cause electric shocks and fires and must be replaced
immediately.
•
Only operate the device with the housing completely
closed.
Derksen Lich�echnik
Werbung
Kapitel
Inhaltsverzeichnis
