Inser�Ng/Changing The Projec�On Mo�F (Gobo) - PHOS 45s pole mount pro Nutzungsinformation

4.1. Inser�ng/changing the projec�on
mo�f (gobo)
1. Loosen the knurled screw.
2. Remove the gobo holder.
3. Unscrew the gobo holder.
4. Insert the gobo into the holder with the mo�f back-to-
front. The front side must face the light source. (Note:
Touch only the edges of the gobo when inser�ng it into
the case.)
5. Ensure that the gobo is placed flat in the holder.
6. Screw the gobo holder together. Carefully press against
the gobo so that it is firmly and securely posi�oned in
the case.
A. Front side: The coated side of the gobo. The front
side faces the light source.
B. Dark side: The dark part of the coa�ng can be seen
through the glass. The dark side faces the projec�on
lens.
7. Insert the gobo holder into the projector head.
8. Tighten the knurled screw.
PHOS s pole mount pro
Se�ngs
39 / 76