Connec�Ng To The Power Supply - PHOS 45s pole mount pro Nutzungsinformation

2. Secure the projector with the cylinder head screw
M6 x 12 (a.) with spring washer M6 (b.) and washer M6
small (c.) in the centre hole.
3. Mount the cylinder head screw M6 x 12 (a.) with spring
washer M6 (b.) and washer M6 big (c.) in the curved
long hole. The base plate of the device stand has two
threaded holes to allow moun�ng in any posi�on.
4. Check that the projector is firmly seated on the
moun�ng bracket.
WARNING! Danger of electric shock!
An electric shock can cause serious injury or death.
▶ Only allow a qualified electrician to carry out electrical connec�ons.
3.4. Connec�ng to the power supply
1. Unscrew the individual parts of the waterproof inline
connector.
2. Remove the terminal block.
34 / 76
Installa�on
c.
b.
a.
c.
b.
a.
Derksen Lich�echnik