Til�Ng The Projector Head; 360° Rota�On Of The Projector Head - PHOS 45s pole mount pro Nutzungsinformation

WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶ Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶ Never stare directly into the beam of light.
• Switch on the projector.
4.2. Til�ng the projector head
1. Remove the device cover. (See 4.3)
2. Release the hex bolt on the rota�ng axis with the ring
spanner supplied.
3. Turn the projector head to the desired posi�on.
4. Re-�ghten the hex bolt on the axis.
4.3. 360° rota�on of the projector head
The projector head axis has a mechanical stop to prevent
damage to the cable. You can move this stop to reach any
possible rota�onal posi�on:
1. Release the hex bolt on the axis.
2. Turn the projector head to the ver�cal posi�on shown
here and do not move it again un�l the stop is firmly in
place once again
40 / 76
Se�ngs
Derksen Lich�echnik