Overview; Installation; Overhead Rigging - EuroLite LED PAR-56 Bedienungsanleitung

OVERVIEW

INSTALLATION

Overhead rigging

Optional accessories:
EUROLITE TH-90 theatre-hook for 50mm pipe
Safety-rope 40cm x 3mm up to 10kg
Safety-rope 90cm x 3mm up to 10kg
Safety-rope 140cm x 3mm up to 10kg
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
(1) Mounting-bracket
(2) Hole for safety rope
(3) Tube
(4) LEDs
(5) Power cable with safety plug
(6) Mounting bracket screws
No. 58000720
No. 58010120
No. 58010130
No. 58010135
16/39 51913620_V_1_2.DOC