Maintenance - Samsung Bespoke Jet Woody Green VS20A95 Serie Benutzerhandbuch

MAINTENANCE

Maintenance
Cleaning the Clean Station
#15 Replacing the dust bag
When the status indicator turns red, you
should replace the dust bag.
#16 Cleaning the Premotor Filter
Use the handle to lift the filter off and shake
over a bin to remove dust.
#17 Cleaning the Fine Dust Filter
Shake the Fine Dust Filter over a bin to
remove dust.
❇ For detailed information, please
refer to the QR code.
Cleaning the vacuum cleaner
#18 Dustbin/Washable Micro Filter
CAUTION
• After cleaning the Dustbin/Washable Micro
Filter with water, you should dry them
completely in the shade for more than 24
hours before use.
– When heat is applied, part deformation
may occur.
– If the filter is not dried completely before
being used, it can cause an odor.
• If the Dustbin or the filter is clogged, the
vacuum may stop its operation due to the
overheating prevention device of the motor.
– Clean the Dustbin or the filters and then
operate the vacuum again.
#19 Fine dust filter
Make sure to turn off the product before
cleaning the filter.
• Twist and pull off the Fine Dust Filter, and
tap it gently to remove the dust.
• Wash the filter with running water once a
month to maintain the best performance of
the filter.
• After cleaning, dry it completely for more
than 24 hours in the shade before use.
• For assembly, turn it counterclockwise until
the line under the lock image is not visible.
NOTE
• Do not use detergent or tool when washing
the filter.
• Do not dry with heat.
#20 Slim Action Brush
CAUTION
• Do not clean the brush with water.
• When foreign matter remains on the brush,
remove it with a wet tissue or a dry cloth.
#21 Jet Dual Brush
If the foreign matter is not removed, use
scissors to remove it.
CAUTION
• If a cloth or other foreign matter is
vacuumed up and tangled with the spin
brush, the spin brush will stop working to
protect the brush motor. After cleaning the
brush, turn the power off and then on again.
• If a brush does not work after cleaning, turn
the power off and then on again.
• When cleaning the brush, be careful not to
catch your fingers in the fold of the brush.
#22 Wet Brush
NOTE
• If the spin brush does not work even after
cleaning the (Slim Action Brush) and the
(Wet Brush), the overheating prevention
device of the motor might be in operation.
Wait 30 minutes or more to cool the motor
and operate again.
#23 Pet Tool
Remove the pet's hair using scissors and
suction the pieces.
#24 Extension Crevice Tool / Pipe
Insert a long thin stick and rotate several times
to clean the Extension Crevice Tool or the pipe.
English 17