Installation; Vacuum Cleaner; Power Related - Samsung Bespoke Jet Woody Green VS20A95 Serie Benutzerhandbuch

Installation

• If you have a problem with installing the
Clean Station, contact a Samsung service
center.
❇ Injury or product malfunction from not
installing the Clean Station may not be
compensated.

Vacuum cleaner

• Do not pick up hard or sharp objects such as
glass, nails, screws, coins, etc.
• Do not use without a filter in place. When
servicing the unit, never put fingers or other
objects into the fan chamber in case the unit
accidentally turns on.
• Do not put any objects into openings.
Do not use with any openings blocked.
Keep openings free of dust, lint, hair, and
anything that may reduce air flow.
• Do not pick up toxic materials (chlorine
bleach, ammonia, drain cleaner, etc.).
• Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or hot
ashes.
• Do not use the vacuum cleaner in an
enclosed space filled with vapours given
off by oil based paint, paint thinner, moth
proofing substances, flammable dust, or
other explosive or toxic vapours.
20 English

Power related

WARNING
• Do not bend the power cord with excessive
force or put heavy objects on the power
cord.
– Electric shock or fire may occur.
• When the vacuum is used in a veranda or an
area where water is used, make sure water
does not come into contact with the power
cord or the power plug.
• If there is dust, water, etc. on a pin or
contact point of the power plug pin, wipe
them carefully.
– Abnormal operation or electric shock may
occur.
• Do not pull the power cord and do not touch
the power plug with wet hands.
– Electric shock or fire may occur.
• Do not plug the Clean Station into a power
source with the incorrect voltage. Do not
plug the Clean Station into a multi-plug
outlet or power strip.
– Electric shock or fire may occur.
• Do not use a damaged power plug, power
cord, or loose power outlet.
– Electric shock or fire may occur.
• If the power cord is damaged, have a
Samsung authorized service center replace
the power cord with a new power cord.
– Electric shock or fire may occur.