13 Operation
3
Item
3
12
Groove for actuator
Starting point for manual override
5. Turn housing cover 3 anticlockwise.
ð The product opens.
6. Turn housing cover 3 clockwise.
ð The product closes.
7. Pull manual override off the starting point.
8. Ensure correct positioning of the O-ring.
9. Push actuator 12 into the groove provided for this pur-
pose.
10. Turn housing cover 3 anticlockwise until it stops.
ð The actuator cover is closed.
11. Reconnect the power supply.
GEMÜ SU60 SUMONDO
12
Name
Housing cover
Housing cover actuator
60 / 68
www.gemu-group.com