Setting The Tv Standard; Setting The Automatic Switch-Off; Restoring The Factory Setting - DNT UltraZoom PRO Bedienungsanleitung

Setting the TV standard

- Select the menu of the device with
the button.
- Use the arrow keys / to select the
line "TV-Out" and confirm the selection
with the OK button.
- In the settings menu, use the arrow keys
/ to select the desired standard
depending on the connected TV device/
monitor and confirm your selection with
the OK button.

Setting the automatic switch-off

- Select the menu of the device with
the button.
- Select the line "Auto Power Off" with
the arrow keys / and confirm the
selection with the OK button.
- In the settings menu, use the arrow keys
/ to select the desired switch-off
time (Off = no automatic switch-off) and
confirm the selection with the OK button.
- If a switch-off time is selected, the device turns off automatically if no operation
or recording has taken place during the selected timeframe.

Restoring the factory setting

- Select the menu of the device with
the button.
- Select the line "Default Setting" with
the arrow keys / and confirm the
selection with the OK button.
- In the settings menu, use the arrow keys
/ to select the desired option (cancel
= abort, individual settings are retained)
and confirm the selection with the OK
button.
42