Setting The Self-Timer For Single Images; Loop Recording - DNT UltraZoom PRO Bedienungsanleitung

- Now select the desired video resolution
with the arrow keys / and confirm the
selection with the

Setting the self-timer for single images

With this setting, you can set a self-timer period by pressing the record button (9),
after which the device automatically takes one single picture at a time. In this way,
you can record single images during an object examination without blurring caused
by pressing the record button.
- Select single image recording (
- Then select the menu of the device with the
- Use the arrow keys / to select the line "Capture Mode" and confirm your
selection with the OK button.
- Now use the arrow keys / to select the desired interval ("single" = manual
release) and confirm your selection with
the OK button.
- If a self-timer level is selected, the
timer symbol with the set interval time
appears at the top of the picture when
taking a single picture.
- Now start the self-timer by pressing
the record button (9); the picture will
be taken after the selected time period.
The countdown is displayed in seconds.

Loop recording

With this setting, you can determine how long individual video files may be. After the
set time, the device automatically ends the video recording.
40
button.
) with the button.
button.