Herunterladen Inhalt Inhalt Diese Seite drucken

Setup Menu; Select Modes; Adjust The Volume - Grundig CMS 4200 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SETTINGS __________________________________
Tips:
• Each enabled state will be cleared if a button
is not pressed within 15 seconds.
• When the alarm rings, press the
the remote control or on the unit. The alarm
stops but the alarm settings remain.
Set Clock/Alarm while in ON mode
1 In ON mode, press MENU button and then
press OK button to entering system menu
setup.
2 Press
/
buttons on the remote control to
select CLOCK or ALARM setting, and then
press OK button to confirm.
3 Press
/
buttons to setup and confirm
with OK button.
MAIN OPERATION ____________________________
Standby/ON
When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the
button on the remote control or on
the main unit to switch the main unit ON.
• Press the
button on the remote control or on
the main unit to switch the main unit back to
Standby mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit off
completely.
Tips:
• If there is no signal input under the DISC, USB,
BT (Bluetooth), LINE IN or AUX mode, the unit
will automatically switch off within 15 minutes.
40 ENGLISH

Setup Menu

1 In ON mode, press MENU button and then
press OK button to entering system menu
setup.
button on
2 Select the content with
the remote control.
CLOCK
ALARM
RESET
SYNC
SETUP
3 Press OK (Enter) to confirm your selection.
Change the initial values for each of the
settings with the cursors / (Left / Right).
4 To exit the settings, press MENU button.

Select Modes

• Press the MODE button on the unit or on the
remote control to select the desired mode.
• The selected mode DISC, USB, DAB, FM, BT,
AUX, LINE IN will show on the display.

Adjust the Volume

• Press the
control or rotate VOL+/- knob on the unit to
adjust the volume.
• If you wish to turn the sound off, press the
button on the remote control. Press the
button again or press
resume normal volume.
Adjust the Bass Level
• Press the BASS +/- button on the remote
control to adjust the bass level.
/
(Left / Right) on
Set the clock
Set the alarm Timer
Reset device to default setting
Set synchronization the Clock
Setup the FM/DAB menu
(FM/DAB mode only)
/
buttons on the remote
/
buttons to

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis