Emerio PAC-127560 Bedienungsanleitung Seite 12

1) Press the timer button.
2) Press the button "+" or "-" to set the end time.
3) Press the timer button again for confirmation.
- Set the start time and end time when the appliance is just powered on, not running under cooling,
strong cooling, dehumidification, heating or ventilation mode:
1) Press the power button to turn on the appliance and then press the timer button.
2) Follow the voice prompt to press the mode button to select your desired mode: cooling, strong
cooling, dehumidification, heating or ventilation.
3) Press the timer button for confirmation.
4) Press the button "+" or "-" to set the start time and then press the timer button for confirmation.
5) Press the button "+" or "-" to set the end time and then press the timer button for confirmation.
For example:
We set the start time "1" and end time "2" at 9 a.m.
The appliance will then start at 10 a.m. and stop at 12 a.m.
Note:
• At the end of the timer setting, there shall be a voice prompt.
• Once the timer is set, the mode cannot be changed. If you want to change the mode, please press the
power button to turn off and restart.
11. Preset
- Preset setting:
1) Press the preset button to enter the preset mode, and then select the cold storage preset or heat
storage preset.
2) Press the button "+" or "-" to select how many hours to use after the preset, and select the time
interval between 4 hours and 24 hours. After selecting the time, press the preset button again for
confirmation, and the voice prompts that the preset is completed.
- Preset cancellation method:
1) Press the preset button again, the previous preset will be cancelled, and a new preset can be
made at this time.
2) After the power is off, the preset will be cancelled automatically.
3) Press and hold the preset button for more than 3 seconds to cancel the preset.
Note:

A few hours before the preset, the machine starts cold storage or heat storage. After the end of cold
storage or heat storage, it will automatically enter the standby state.

Other operations cannot be carried out after the preset. If users need to do other operations, please
cancel the preset first.

When using preset for cooling function, please make sure the windows are open for ventilation.
12. Child lock
1) Press and hold the button "+" and "-" at the same time for 3 seconds to turn on the child lock
function. All the buttons will be locked and cannot be operated.
2) Press and hold the button "+" and "-" at the same time for 3 seconds again to turn off the child lock
function or unplug the power plug directly.
- 11 -