Emerio PAC-127560 Bedienungsanleitung Seite 11

2) Press the button "+" or "-" to set the strong cooling temperature, between 16℃ and 32℃.
3) The wind speed is by default and cannot be adjusted.
4) Press the swing button to turn on/off the swing function.
Note:
• It displays the room temperature during strong cooling.
• When the cooling capacity of the water in the water tank is used up (the water temperature reaches
40 ℃), the cooling shall be stopped, and the water can only be used after the cold storage or the
high-temperature water in the water tank is replaced.
6. Heat storage
1) Press the mode button to select the heat storage function.
2) Press the button "+" or "-" to set the heat storage temperature, between 20℃ and 30℃.
3) Once the digital display shows your set temperature, it means the heat storage completes.
Note:
• During heat storage, the air outlet fan is closed, and there is no air volume to blow out.
• The actual temperature of water in the water tank is displayed during heat storage.
7. Heating
Once the heat storage is finished:
1) Press the mode button to select the heating mode.
2) Press the button "+" or "-" to set the heating temperature, between 16℃ and 32℃.
3) Press the wind speed button to select the low / mid / high / automatic wind speed in 4 levels.
4) Press the swing button to turn on/off the swing function.
Note:
• It displays the room temperature during heating.
• The air inlet and air outlet shall not be covered.
8. Dehumidification
1) Press the mode button to select the dehumidification mode.
2) Press the swing button to turn on/off the swing function.
Note:
• It displays the room temperature during dehumidification.
9. Ventilation
1) Press the mode button to select the ventilation mode.
2) Press the wind speed button to select the low / mid / high wind speed in 3 levels.
3) Press the swing button to turn on/off the swing function.
Note:
• It displays the room temperature during ventilation.
10. Timing
- Set the end time when the appliance is running under cooling, strong cooling, dehumidification,
heating or ventilation mode:
- 10 -