Active Mode; Eco Mode; Demo Mode - Electrolux SB339NCN Benutzerinformation

52 www.electrolux.com
Once the maximum or
minimum temperature is set,
pressing the key again will
not change temperature
setting. The audible sound is
heard.

3.4 Active mode

Active mode allows to change any
setting in the appliance.
To switch on active mode, open the door
or hold any button for 1 second until the
audible signal is heard.
The icons illuminate.
The active mode switches
off automatically after 30
seconds.
3.5 Temperature boost
functions FASTCOOL and
FastFreeze
The temperature boost functions rapidly
decrease the temperature in desired
compartment for proper food storage
reason. We suggest activating the
FASTCOOL to chill the products more
rapidly to avoid warming the other food
which is already in the refrigerator and
FastFreeze function to provide rapid
decreasing the temperature in the
freezer, allowing fresh food to freeze
quickly.
This functions stop
automatically as follows:
• FASTCOOL after 6
• FastFreeze after 52
1. To switch on the FASTCOOL press
mode key once.
The FASTCOOL indicator appears.
2. To switch on the FASTCOOL and
FastFreeze together press mode key
twice.
The FASTCOOL and FastFreeze
indicators appear.
3. To switch on the FastFreeze press
mode key three times.
The FastFreeze indicator appears.
All manuals and user guides at all-guides.com
hours,
hours.
4. To deactivate the functions press
mode key until the FastFreeze and/or
FASTCOOL indicators switch off.

3.6 ECO mode

The ECO mode is activated if the set
temperature for desired compartment is
as follows :
• 4°C for fridge compartment;
• -18°C for freezer compartment
The ECO mode indicator is shown when
the function is activated.
This settings guarantee
minimum energy
consumption and proper
food preservation
characteristics.
The ECO mode is
deactivated as long as the
DYNAMICAIR function is
switched on.
3.7 DYNAMICAIR function
The activation of the DYNAMICAIR
function increases energy consumption
(refer to "Daily use").
The DYNAMICAIR function
can be activated
automatically
1. To switch on the function manually
press DYNAMICAIR key until the
corresponding indicator illuminate.
The DYNAMICAIR indicator appears.
2. To switch off the function press
DYNAMICAIR key until the
DYNAMICAIR indicator switches off.

3.8 DEMO mode

DEMO mode allows to operate the panel
without activating the appliance.
• To activate the mode, press mode key
9 times, until dE appears on the
display.
• To deactivate the mode, press mode
key for approximately 10 seconds.
The appliance returns to regular
mode.