Herunterladen Inhalt Inhalt Diese Seite drucken

Brakes; Operating The Parking Brake; Adjusting The Parking Brakes - B+B Pyro Light Optima Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Pyro Light Optima:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Pyro Light Optima
Pyro Light Optima XL

4.10. Brakes

As standard, the wheelchair is fitted with parking brakes to be operated
by the wheelchair user.
23.

4.10.1. Operating the parking brake

The parking brake must only be used for parking. To slow down while
driving, you must only use the drive wheel handrims or the optional
drum brakes for attendant.
When braking using the handrims, hold the highest point. First let
the handrims slide through your hands
Slowly increase the braking force by exerting gripping force on the
handrims, until you come to an abrupt stop.
As soon as the wheelchair has stopped, push both brake levers
forward (Fig. 23). The wheelchair is securely braked when it can no
longer be pushed and both brake levers are pushed forward to the
stop position.
Pull
the
66
66
| Lightweight wheelchair
The parking brakes must not be used as operational
brakes, as there is a risk of death due to the risk of
falling!
Please note that there is a risk of burns if your hands
heat up when braking using the handrims!
lever
towards
you
to
release
the
Never use the brake lever as a support - e.g. when
transferring or standing up -, otherwise there is a
risk of tipping over and falling! The lever could
break off!
Lightweight wheelchair |
The parking brake - with or without brake lever
extension - only works on one drive wheel and
must therefore always be used on both sides!

4.10.2. Adjusting the parking brakes

Adjusting the brakes must only be carried out by
trained personnel. Please bear in mind that if
the brakes are set incorrectly this can have life-
threatening consequences.
Mount the brake in a position which is operable and offers secure
braking in all driving situations.
To adjust the gap, undo the two socket screws on the brake bracket
(Fig. 24).
Then push the brake system to the correct position along the
bracket.
Finally re-tighten the two socket screws.
Make sure that the brakes click into place when operating the lever
and that they don't snap back.
brake.
Bischoff & Bischoff GmbH |2021-09-06 - Revision: 1
Pyro Light Optima
Pyro Light Optima XL
24.
67
67

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pyro light optima xl

Inhaltsverzeichnis