Default Setting; Auto-Restart - INVENTOR V7CRI-12WiFiR/U7RS-12 Benutzerhandbuch

Features

Default Setting

When the air conditioner restarts after a power
failure, it will default to the factory settings
(AUTO mode, AUTO fan, 24°C (76°F)). This
may cause inconsistencies on the remote
control and unit panel. Use your remote
control to update the status.

Auto-Restart

In case of power failure, the system will
immediately stop. When power returns, the
Operation light on the indoor unit will flash. To
restart the unit, press the ON/OFF button on
the remote control. If the system has an auto
restart function, the unit will restart using the
same settings.
Three-minute protection
A protection feature prevents the air conditioner from being activated for approximately 3 minutes
when it restarts immediately after operation.
Energy Saving Tips
DO NOT set the unit to excessive temperature levels.
•
While cooling, close the curtains to avoid direct sunlight.
•
Doors and windows should be kept closed to keep cool or warm air in the room.
•
DO NOT place objects near the air inlet and outlet of the unit. This will reduce the efficiency of
•
the unit.
Set a timer and use the built-in SLEEP/ECONOMY mode if applicable.
•
If you don't plan to use the unit for a long time, remove the batteries from the remote control.
•
Clean the air filter every two weeks. A dirty filter can reduce cooling or heating efficiency.
•
Adjust louvers properly and avoid direct airflow.
•
Closing curtains during heating also
helps keep the heat in
Louver Angle Memory Function
Some models are designed with a louver angle
memory function. When the unit restarts after a
power failure, the angle of the horizontal louvers
will automatically return to the previous position.
The angle of the horizontal louver should not be
set too small as condensation may form and drip
into the machine. To reset the louver, press the
manual button, which will reset the horizontal
louver settings.
Refrigerant Leak Detection System
In the event of a refrigerant leak, the LCD screen
will display "EC" and the LED indicator light will
flash.
Doors and windows should be kept
closed
ƒPage 9

„
Page 9
