INVENTOR V7CRI-12WiFiR/U7RS-12 Benutzerhandbuch Seite 10

Manual Operations
This display panel on the indoor unit can be used to operate the unit in case the remote control has
been misplaced or is out of batteries.
Infrared receiver
Operation
indicator
Timer indicator
LED display
MANUAL button: This button selects the mode in the following order: AUTO, FORCED COOL, OFF.
•
FORCED COOL mode: In FORCED COOL mode, the Operation light flashes. The system will then
•
turn to AUTO after it has cooled with a high wind speed for 30 minutes. The remote control will
be disabled during this operation.
OFF mode: When the panel is turned OFF, the unit turns off and the remote control is re-enabled.
•
ƒPage 10
„
 Page 10 
Manual button
Alarm indicator
PRE-DEF
(pre-heating/defrost)
indicator
Electric heating
indicator
( some models)
LED display
Timer
indicator
Louver
Fig. 3.1
Operation indicator
Fig. 3.2
3
Air outlet
Air inlet
Alarm indicator
When wireless control
feature is activated
( some models)
PRE-DEF indicator
(pre-heating/defrost)
Display
panel