Cleaning Surfaces; Troubleshooting; Remedying Problems Yourself - SEVERIN KA4813 Bedienungsanleitung

10. Press the " " button to switch off the hotplate
11. Run the device through two rinsing cycles, ►"7.3 Running water
through the appliance" on page 31, to remove the remains of the
water/vinegar solution.

7.5 Cleaning surfaces

Clean the surfaces of the appliance with a soft, lint-free cloth.

8 Troubleshooting

GB

8.1 Remedying problems yourself

WARNING!
Risk of injury! The appliance does not contain any
parts that you can repair yourself.
– Never attempt to operate a defective appliance.
– Never attempt to repair the appliance by your-
self. If your appliance is defective, contact our
customer service department (see ►" Service
Centres" on page 192).
32
All manuals and user guides at all-guides.com
Before contacting our customer service, check with the aid of the table below
.
7
whether you can remedy the problem yourself.
Problem
The appliance
will not switch
on.
Coffee does
not flow out of
the outlet (drip
stop).
Coffee is too
watery.
All display
indicators
flash.
Error codes
E01 / E14
Error codes
E12 / E13
Cause Remedy
The appliance is Plug the power plug into a socket
not connected outlet with earthing contact.
to the power
supply.
Coffee jug not Check that the coffee jug is placed
placed correctly correctly on the hotplate and that is
under outlet. presses up the valve in the outlet.
Set the grind finer, ►"Adjusting the
Grind set too
coarse. grind" on page 27.
Too little ground Refer to the measurement table,
►"5.2 With ground coffee" on page
coffee.
28.
Carry out descaling ►7.4 Descale
The device must
be descaled. device
Problem with Call customer service.
the grinder
PCB fault Call customer service.