AEG OX6211H Bedienungsanleitung Seite 66

C
A
66 ATAG
All manuals and user guides at all-guides.com
Fig. 3:
securely with both hands and push it out upwards.
Once the inner panes have been removed, clean
the door and the panes.
Clean the glass panes with warm water only. Do
not use rough cloths, scouring pads, steel wool,
acids or abrasive products, so that the surfaces of
the glass panes and the door are not damaged.
After cleaning, re-insert the inner panes.
Fig. 3
After reinserting the inner panes:
Fig. 4:
original position and check that everything is
securely fastened and firm.
Appliances in stainless steel or aluminium
We recommend you only clean the oven door with
a wet sponge and then dry it afterwards with a soft
cloth. Never use scourers, acids or harsh abrasives,
Fig. 4
as these can damage the surface. Clean the panel
with the same care.
Then take hold of the second inner pane C
To correctly mount the inner pane C (with
side decors along the frame), the surface
marked with stripes has to face the oven
cavity in a way that, when touching the
surface on sight, the light roughness of the
silk-screen printing is perceptible.
To correctly mount the inner pane B (with
side decors on two lateral sides), the surface
marked with stripes has to face the oven
door in a way that, when touching the
surface on sight, the light roughness of the
silk-screen printing is not perceptible.
insert the perforated plate A back in its
DO NOT clean the oven door while the glass
panels are warm. If this precaution is not
observed the glass panel may shatter.
If the door glass panel becomes chipped or
has deep scratches, the glass will be weak-
ened and must be replaced to prevent the
possibility of the panel shattering. Contact
your local Repair agent who will be pleased
to advise further.