Electronic Programmer; Setting The Time Of Day - AEG OX6211H Bedienungsanleitung

Electronic programmer

4
5
6
2 1
48 ATAG
All manuals and user guides at all-guides.com
7
8
3

Setting the time of day

When the power supply is switched on, or after a
power failure, the "Time of day" pilot lamp
flash on the display.
To set the correct time of day:
1.
2.
seconds: the "Time of day" pilot lamp
out and the display will show the set time. The
appliance is ready for use.
1. Control button for selecting a function
SELECT
2. Decreasing control button " "
3. Increasing control button " "
4. Display
5. "Cooking Duration" pilot lamp
6. "End of cooking" pilot lamp
7. "Minute minder" pilot lamp
8. "Time of day" pilot lamp
The oven will only work if the time of
day has been set.
However, the oven can also be operated
without any programme.
In the event of a power failure, all the settings
(time of day, programme setting or
programme in operation) will be cancelled.
When the power is restored, the numbers in
the display will flash, and the clock/timer
has to be reset.
Press button " " or " ".
After the setting is carried out, wait for 5
will
will go