Safety Thermostat - AEG OX6211H Bedienungsanleitung

All manuals and user guides at all-guides.com
Mains on indicator
The mains on light will come on when the oven
function control knob is set.
Oven thermostat
Turn the thermostat control knob clockwise to
select temperatures between 50°C and 250°C.
Oven thermostat control indicator
The thermostat control indicator will come on when
the thermostat control knob is turned. The indicator
will remain on until the correct temperature is
reached. It will then cycle on and off to show the
temperature is being maintained.

Safety thermostat

To prevent dangerous overheating (through incorrect
use of the appliance or defective components), the
oven is fitted with a safety thermostat, which interrupts
the power supply. The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
The cooling fan
The oven is provided with a cooling fan, meant to
keep the front panel, the knobs and the oven door
handle cool.The fan switches on automatically after
a few minutes of cooking. Warm air is blown out
through the aperture above the oven door.
When the oven is switched off, the fan may run on
after the oven is switched off to keep the controls
cool. This is quite normal.
The action of the cooling fan will depend on how
long the oven has been used and at what
temperature. It may not switch in at all at lower
temperature settings nor run on where the oven has
only been used for a short time.
46 ATAG