Option 2: Setting Up The Youvi Camera Module - PEAKnx wantec Monolith C IP Kurzanleitung

3 Setting up the VoIP communication
tion about registration with the SIP server will appear. If this is successful, the door station
module is ready for use.
21. To test these settings, press the door bell on your door station. The door station widget
opens on the panel:
Functions of the widget:
Before accepting the call: accept video call from the door station, reject, or open the door
■
directly
After accepting the call: make video call, open door, mute, end call, deactivate camera
■
image
Select a ringtone of 5 predefined tunes or upload a ringtone in the tile settings of the Door
■
intercom widget
Define the duration of the ring tone in the tile settings of the Door intercom widget
■
The widget closes automatically 3 seconds after the door is opened.
■
Video transmission in MJPEG, JPEG and RTSP
■

3.2 Option 2: Setting up the YOUVI camera module

Notes on the camera stream
On the configuration page of the door station, under Extended settings > Video, you will find
various settings for entering the resolution and frame rate. Please keep in mind that high frame
rates and resolutions will additionally burden your network.
To make use of the wantec door station's camera, it needs to be added and set up within YOU-
VI Configuration.
1. To add the camera module open YOUVI Dashboard on the panel and select Install Camera
Device. If you do not have a full license yet, you can purchase it in the PEAKnx Shop.
21