Option 2: Setting Up The Youvi Camera Module - PEAKnx Mobotix T25 Kurzanleitung

3 Setting up the VoIP communication
20. When you have added the door station module to the Dashboard, a widget with informa-
tion about registration with the SIP server will appear. If this is successful, the door station
module is ready for use.
21. To test these settings, press the door bell on your door station. The door station widget
opens on the panel:
Functions of the widget:
Before accepting the call: accept video call from the door station, reject, or open the door
■
directly
After accepting the call: make video call, open door, mute, end call, deactivate camera
■
image
Select a ringtone of 5 predefined tunes or upload a ringtone in the tile settings of the Door
■
intercom widget
Define the duration of the ring tone in the tile settings of the Door intercom widget
■
The widget closes automatically 3 seconds after the door is opened.
■
Video transmission in MJPEG, JPEG and RTSP
■

3.2 Option 2: Setting up the YOUVI camera module

To make use of the Mobotix door station's camera, it needs to be added and set up within
YOUVI Configuration.
1. To add the camera module open YOUVI Dashboard on the panel and select Install Camera
Device. If you do not have a full license yet, you can purchase it in the PEAKnx Shop.
2. Switch to YOUVI Dashboard > Camera Device OR open the configuration page on your PC
in your browser, making sure that the system running the browser is on the same network
as the PEAKnx touch panel. To do this, enter the following URL in your browser:
− http://x.x.x.x:31228
28