Setting Up The Voip Communication; Option 1: Setting Up The Youvi Door Station Module - PEAKnx wantec Monolith C IP Kurzanleitung

3 Setting up the VoIP communication

Telephony devices, if you edit the created door intercom system and switch to the „Login
data" tab.
9. The status should now show „Registration successful".
10. To control the door opener, you can edit the opening DTMF code and time of the opening
interval [sec] under Basic Settings > Relay.
− This means, if you set the „55" as opening code and want to open the door after ac-
cepting a call from the door intercom, simply press „55" on the number field of the VoIP
software.
3 Setting up the VoIP communication

3.1 Option 1: Setting up the YOUVI door station module

Via the door station module it is possible to integrate SIP intercom systems into the visualiza-
tion. To do this, proceed as follows:
1. Open the YOUVI Configuration Dashboard page via the desktop shortcut or the green
house in the taskbar.
− You can also reach the configuration page on your browser, as long as you are in the
same network as the PEAKnx touch panel. To do this, enter the following URL in your
browser:
18