Technical Support - PEAKnx wantec Monolith C IP Kurzanleitung

4 Technical Support

ted, open the YOUVI Visu settings under Auto start and activate this feature.
12. Now switch on the Edit Mode and switch to the Dashboard.
13. Select the „Webcam" button to select a Camera created in YOUVI Configuration.
VoiP-Software
To use „Voice over IP" on the touch panel, you need a running instance of a VoIP software, like
Micro SIP, Zoiper or similar. This VoiP software appears when a call from the door station is
made and pops up, even with the visualization running. So you can see the camera image and
answer the call at the same time.
14. Download and install the desired VoIP software.
15. Open the (SIP) settings.
16. For the Domain or SIP server enter the IP address of your Fritzbox and for SIP Username
and Password enter the user name and password which you have assigned for the PEAKnx
Panel in the Fritzbox/SIP server.
− Your login data can also be found under fritz.box > Telephony devices, if you edit the
created PEAKnx Panel (IP telephone) and switch to the „Login data" tab. The IP address of
the fritzbox is the same as „Registrar".
17. The status of the Voip software should now show that the phone has successfully regis-
tered with your Fritzbox.
18. To ensure that the VoIP software app is started automatically when the system is restarted,
open the settings and activate the autostart of the software.
19. If available, enable the option to have notifications about an incoming call appear in the
foreground.
20. To test the correctness of these settings, press the bell on your door station. After a few
seconds, your PEAKnx touch panel should display an incoming call notification.
4 Technical Support
If you experience problems with your PEAKnx Panel please contact our PEAKnx Support Team:
− Mail: support@peaknx.com
− Create a Support Ticket: https://support.peaknx.com/?lang=en_US
− Tel.: +49-6151-279 1825
23