Saeco Odea Giro Bedienungsanleitung Seite 113

DESCALING
16
7
Empty the container with the
used descaling solution.
10
Rinse and fi ll the tank with fresh
drinking water.
13
Turn the knob until the
position is reached to empty the
water tank.
When this operation is completed,
turn the knob until it is in the rest
position ( ).
Once descaling has been performed:
1. Install the "Aqua Prima" fi lter, if available;
2. Prime the circuit as described on page 7, from step 7.
All manuals and user guides at all-guides.com
8
Press the button to turn off the
machine. After 10 minutes, turn
on the machine again.
11
Press the hot water button.
14
Press the hot water button
for 6 seconds to disable the
descaling alarm.
9
3
8
Repeat steps 3 - 8 until all the
descaling solution in the tank
has been dispensed.
12
Place a large container beneath
the steam spout.
15
Fill the tank again with fresh
drinking water.