BVS CA – GX2 - _ _ _ _ _ _ - _ _ _ _ _ _ - 001
1 User instructions
1.1
Introduction
This user's guide describes the mvBlueCOUGAR-XD, a GigE Vision compliant Dual-Gigabit Ethernet industrial camera
family, and the startup for an immediate operation.
The mvBlueCOUGAR-XD is an imager for automated industrial environments. Some outstanding properties are:
•
Reduce of the host system's load and functional added value by implemented FPGA based Smart Features
•
Double bandwidth with two Ethernet connectors
•
Reliable image transfer by internal image buffer of 256 MBytes
•
High-bit ADC for images with a higher information density
•
Comprehensive support of third-party software by image processing standards GigE Vision and GenICam
•
Easy application integration due to Ethernet
•
Simple camera access from the network
These characteristics make it possible that the mvBlueCOUGAR-XD can be used as the eyes for robot control systems,
for quality assurance and traceability in different industries.
The documentation of the Smart Features as well as the comprehensive technical documentation with use cases can be
found in the online manual here:
•
→ https://www.matrix-vision.com/manuals
The online manual can be searched using all common search engines.
This user's guide applies to the following variants of the mvBlueCOUGAR-XD:
Camera vari-
Description
ant
Standard
Standard housing with
2x RJ45 and 2x 12-pin Hirose connectors as
well as
1x video iris connector
MATRIX VISION GmbH completes the customer offering with a distinct service and accessories palette (see Appendix).
1.2
Other applicable documents
Additional information about this product can be found at www.matrix-vision.com on the product page, e.g. in the
following documents:
•
Data sheet
•
Declaration of Conformity
•
Disposal
www.matrix-vision.com
Digital Inputs
Digital Outputs
4x (opto-cou-
4x high-side switch (non-iso-
pled)
lated)
3