Venga VG RVC 3000 WH Bedienungsanleitung Seite 14

Cleaning the robot's rolling brush, side brush, swivel wheel and sensors.
1. Take out the rolling brush, clean the
vacuuming channel with a cloth.
2. Clean the rolling brush: if any hair,
threads or yarn got stuck, simply cut
them loose with the help of the
cleaning tool that has been
provided with your robot. Then
carefully remove everything. Only if
the rolling brush can rotate freely,
your Venga! robot can operate at
peak performance.
3. Remove the side brushes, use a cloth
to remove the dust from the brushes.
4. Pull out the swivel wheel, then clean
it with the cleaning tool.
5. Dust off the cliff and anti-collision
sensors to maintain optimal
performance.
Our recommendations to maximally extend the battery's lifespan:
• When using for the first time, first use the remaining power of the robot, then charge it
for 4-6 hours.
• Avoid overdischarge of the battery.
• If the robot does not have to operate for more than 3 days, we advise to fully charge
it and turn off the main power switch on the bottom.
VG RVC 3000 14