Venga VG RVC 3000 WH Bedienungsanleitung Seite 11

ROOM CLEANING
When a specific room needs to be cleaned, please
press the room cleaning button on the remote
control. The robot will combine spiral cleaning,
random cleaning and edge cleaning. It will stop
after 30 minutes and switch to return to charging
dock mode.
MAXIMUM SUCTION
The robot increases its suction power to provide a
deeper cleaning process when you press the
"MAX" button on the remote control. Maximum
suction is off by default. You can activate it at any
point during a cleaning program.
Please be aware that this extra boost of power will
consume more energy and that the robot will have
to return to the charging dock more often for
charging.
MOP CLEANING
The robot is equipped with a water tank that
enables it to mop floors.
1. Attach the cloth and fill the tank with water.
Remove the dust bin. Place back the water tank
and start the desired cleaning mode.
2.
When finished, empty the water tank, rinse it with
clean water and store it in a dry environment or it
may become cloggy and smelly. Check that the 4
water drainage holes are not blocked. If necessary,
unblock them with a small needle.
RETURN TO CHARGING DOCK
When at any point the robot's power drops below 20%, it will go into return to charging
dock mode by lowering the rotation speed of the brushes and using a customized
movement pattern to return to its charging dock.
The maximum signal range from the charging dock to the robot is 6 metres, but it can be
considerably shortened by any obstacle in front of the charging dock. Make sure the the
area around the charging dock is open and uncluttered - cf. Charging dock position.
11 VG RVC 3000