Cleaning And Maintenance; Cleaning; Inspection And Maintenance; Spare Parts - PCE WALLBOX EV11 Montage- Und Bedienungsanleitung

9. Cleaning and maintenance

9.1 Cleaning

CAUTION
Stop the charging process before cleaning, care
and maintenance work. In addition, disconnect
the charging cable from any connected vehicle
and place the protective cap on the charging
coupler.
You can clean the charging station as follows:
Wipe the outside of the charging station with a dry
cloth.
CAUTION
The charging station must not be cleaned with a
water or steam jet cleaner.
CAUTION
Never use aggressive cleaning agents, abrasive
materials or jet water to clean the charging sta-
tion. This may result in damage to the charging
station.

9.2 Inspection and maintenance

The charging station must be checked regularly by the
owner for defects in the charging socket or charging
coupling (including charging cable) and for damage to
the housing (visual inspection) as well as for defects,
wear and dirt on the charging socket or charging cou-
pling including charging cable.
The charging station and the associated sub-distri-
bution must be checked once a year for function and
safety by a qualified electrician as part of the periodic
inspection. The result of the inspection must be re-
corded and kept until the next inspection.
NOTE
Inspection, maintenance or repair of the
charging station may only be carried out by
qualified electricians.

9.3 Spare parts

Only original spare parts are to be used.

9.4 Contact and support

PC Electric Gesellschaft m.b.H.
Diesseits 145
4973 St. Martin im Innkreis
Telefon: +43 7751 61220
eMail: emobility@pcelectric.at

9.5 Disposal

NOTE
Dispose of the wallbox properly in accordance
with the country-specific regulations.
Electrical and electronic equipment must
k
be disposed of separately from general
household waste.
The materials are recyclable according to
k
their labeling.
DE
EN
39