Ending The Charging Process - PCE WALLBOX EV11 Montage- Und Bedienungsanleitung

7.3 Ending the charging process

When the desired state of charge is reached, end
k
the charging process on your electric vehicle. To do
this, follow the instructions in the user manual for
your vehicle.
NOTE
After the vehicle is fully charged, the vehicle will
end the charging process automatically. LED
illuminates GREEN.
Disconnect the charging cable from the electric
k
vehicle.
NOTE
Do not disconnect the charging cable from
the charging station until the automatic lock is
released.
NOTE
If the voltage supply to the charging station is in-
terrupted, the charging coupling is not unlocked
by the charging station. To cause unlocking,
proceed according to the user manual of the
vehicle!
DE
EN
37