Technical Data - PCE WALLBOX EV11 Montage- Und Bedienungsanleitung

5. Technical data

Product type
Conformity of standards
Number of charging points
Charging cable length / cross section
Vehicle coupling
Charging power
Charging mode
Type of charging current
Number of contacts
Rated current In
A
Cross section (supply)
Cable gland (supply)
Rated voltage U
N
Rated frequency f
N
Mains system supply
Protection class
Overvoltage category
EMV class
Ambient temperature operation
Ambient temperature storage
Protection rating
Impact resistance
External fuse protection required
Circuit breaker
Status according to EN 61851-1
DC fault current detection
Housing
Dimensions/weight
Mounting type
The following directives and standards have been applied:
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
ROHS Directive 2011/65/EU
IEC TS 61439-7; EN 61851-1
Wallbox EV11
IEC TS 61439-7; EN 61851-1
1
5m / 5G2,5mm² + 2x0,5mm²
Type 2
3,7 kW (1~) or 11kW (3~)
Mode 3, Case C (with vehicle coupling)
AC 3-phase (or AC 1-phase)
5 (L1, L2, L3, N, PE)
16A
5G2,5mm² (16A 3~), 3G2,5mm² (16A 1~)
M25 (cable diameter 8–17mm)
230V / 400V
50 Hz
TN / TT
II
III
B
-25°C to +40°C (without direct sunlight)
-35°C to +55°C
IP44
IK08
RCD Typ A I∆N≤30mA
not integrated (MCB B16 or C16 necessary)
Status D with fans is not supported
6mA RCM Modul
Plastic housing made of PC/ABS (similar to RAL7035),
Housing cover steel powder coated (similar to RAL7016)
WxHxD 248 x 337 x 124mm / 4,65 kg
Surface mounting
DE
EN
29