Symbol Description - Baker Hughes Druck DPI 800 Bedienungsanleitung

Before you start an operation or procedure in this publication, make sure that you have the
necessary skills (if necessary, with qualifications from an approved training establishment).
Follow good engineering practice at all times.
Safety - Marks and Symbols on the Instrument
Symbol Description
This equipment meets the requirements of all relevant European safety directives. The
equipment carries the CE mark.
This symbol, on the equipment, indicates that the user should read the user manual.
This symbol, on the equipment, indicates a warning and that the user should refer to the
user manual.
Ce symbole, sur l'appareil, est un avertissement qui indique que l'utilisateur doit consulter
le manuel d'utilisation.
Ground (Earth)
On/Off
Battery
P1/P2 Identifies the pressure range connector.
Do not dispose of this product as household waste. Use an approved organization that
collects and/or recycles waste electrical and electronic equipment. For more information,
contact one of these:
- Our customer service department: Druck.com
- Your local government office.
MWP: The maximum working pressure for the connector. Example: 2 x FS (FS = Full scale
pressure).
REFERENCE: The connector is a reference port for reference pressure only. Refer to
"Specification Data" on page 22.
The identification on each pressure connector includes the type of thread (1/8 NPT, G1/8...).
Copyright 2003 Baker Hughes Company.
2 | DPI 800/802 Instruction Manual–English