Select A Task (Measure) - Baker Hughes Druck DPI 800 Bedienungsanleitung

1.6 Select a Task (Measure)

When the instrument is set up (Table 1), use the Select Task menu to select the applicable task.
In Table 2 & Table 3, P1 and P2 are internal sensors, and IDOS is a Universal Measurement
Module (UMM). If you attach a UMM to the communications port (Figure A1 - item [9]), the Select
Task menu shows the applicable IDOS options.
Options
(If applicable)
mA
mA(24V)
IDOS
a. Optional item
Table 3 shows all the one and two function operations that are available. If you attach a UMM,
you can only use the options that include IDOS.
Function
mA
mA(24V)
Menu:
1
Select Task
P1... g
MENU
OK
P2 ... g
(Table 2 & Table 3)
Table 2: Menu Options - Select Task
Description
P...
An input measurement task (P1, P2
the pressure range for the sensor.
∆P... An input measurement task to measure the pressure
difference (∆) between: P1 and P2
UPM .
a
∆P = High range IDOS - Low range IDOS
DPI 802/802P only. A mA measurement task.
DPI 802/802P only. A mA measurement task + the loop
power supply is on.
DPI 802/802P only. A switch test.
UMM only. An IDOS measurement task.
Pressure options only. A leak test.
To set up the way the instrument works.
Additional data: Refer to: Set Up (Table 1).
Table 3: Permitted 1 and 2 Function Operations
P1
(1)
(1) (2)
(1) (2)
Display:
2 3
Task 1xxx g
1xxx g
MENU

OK
 0.000
Sk2 = Settings
). The task includes
a
, or P1/P2
a
∆P...
P2 (Table 2)
(1) (1)
(2) (2)
(2) (2)
English–DPI 800/802 Instruction Manual | 7
Sk2
and a
a
IDOS
(1)
(2)
(2)
Copyright 2003 Baker Hughes Company.