English - Kenwood AX511 Bedienungsanleitungen

English

AX511 for use on Check the position of the
folding tool in the bowl
Kitchen Machine kMix
Ideally the folding tool should
be almost touching the
bottom of the bowl.
before using your
2 If the clearance needs to be
Kenwood attachment
adjusted, raise the mixer head
G
Read these instructions
and remove the tool.
carefully and retain for future
Using the spanner provided
reference.
loosen the nut sufficiently to
G
Remove all packaging and any
allow adjustment of the
labels.
shaft
G
Wash the tool: see 'care and
closer to the bottom of the
cleaning'.
bowl, turn the shaft anti-
The folding tool is designed for
clockwise. To raise the tool
folding light ingredients into
away from the bottom of the
heavier mixtures for example
bowl turn the shaft clockwise.
meringues, mousses, fruit
Re-tighten the nut.
fools, Genoese sponges,
3 Fit the tool to the mixer and
soufflés and to fold flour into
lower the mixer head. (Check
cakes mixes. It is not to be
its position see point 2).
used with heavy recipes such
Repeat the above steps as
as dough, creaming fat and
necessary until the tool is set
sugar or all in one cake mixes.
correctly. Once this is
achieved tighten the nut
securely.
safety
4 For best results use the Fold
Function
Refer to your main Kitchen
recommended quantity chart.
Machine instruction manual for
relevant safety warnings.
Important: If the Fold
Function on your kMix
to use your folding tool
Kitchen Machine has a
"stop/start" action, use the
1 With the Kitchen Machine
Minimum Speed setting for
switched off, insert the folding
optimum performance
tool and lower the mixer head.
instead of the Fold Function.
2
.
. To lower the tool
and refer to the