English - Kenwood MultiPro XL Weigh+ FDM72 Bedienungsanleitungen

Before using your appliance refer to the separate safety
warning leaflet and read the instructions for usage contained
in this manual carefully. Retain for future reference.
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
Before using for the first time
1 Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2 Wash the parts see 'care and cleaning'.
Key
Processor
Small pusher
1
Medium pusher
2
Large pusher
3
Wide feed tube
4
Lid
5
Bowl
6
Detachable drive shaft
7
Power unit
8
Speed/pulse control
9
Safety interlocks
10
Cord storage (at back)
11
Weighing Function/Count up Timer
Kg/lb button
12
On/zero button
13
Display screen
14
Count up Timer
14b
Weighing tray
15
16A Glass Thermoresist™ Blender
supplied)
a
Filler cap
b
Lid
c
Glass goblet
d
Sealing ring
e
Blade unit
f
Base
g
Filler cap vents
16B Plastic Blender
a
Goblet with fixed blade
b
Lid with drip feed

English

(if
(if supplied)
A Standard Attachments
Knife blade
17
Dough tool
18
Dual whisk
19
Adjustable slicing disc
20
4mm coarse/2mm fine grating disc
21
Not all of the attachments listed below may be
included with your food processor. Attachments
are dependent upon the model variant. Visit
www.kenwoodworld.com for information on how
to buy an attachment not included in pack.
B Optional Attachments
Extra fine grating disc (if supplied)
22
Citrus juicer (if supplied)
23
Glass mini chopper/mill (if supplied)
24
Plastic mini chopper/mill (if supplied)
25
Grinding mill (if supplied)
26
Blend-Xtract 2GO (if supplied)
27
Juice extractor (if supplied)
28
Express Dice (if supplied)
29
Storage bag (if supplied)
30
Spatula
31
To Use Your Food Processor
Illustrations
1 Fit the detachable drive shaft onto the power
unit.
2 Then fit the bowl to the power unit and turn
clockwise until it locks into position.
3 Fit an attachment over the bowl drive shaft.
Always fit the bowl and attachment onto the
processor before adding ingredients.
4 Fit the lid - ensuring the top of the drive
shaft/tool locates into the centre of the lid.
Do not use the lid to operate the processor,
always use the on/off speed control.
09 2
–