Installation - T+A TALIS R 300 Betriebsanleitung

Installation

The speaker terminals can accommodate ready-made cables only. We recommend one of the high-
quality tailor-made cables from the  range.
We recommend that you ask your specialist  dealer for advice on choice of speaker cables, as
they have a significant influence on the sound.

Be sure to connect the red (+) terminal clamp at the speaker to the red (+) terminal at
the amplifier, and the black (-) terminal clamp at the speaker to the black (-) terminal at
the amplifier.
If the speakers are connected with incorrect polarity, they will work 'out of phase', and
pro-per stereo-phonic reproduction will not be possible. The most obvious sign of
incorrect phase is that the sound is diffuse, and bass response poor.

Dangerous voltages may be present at the loudspeaker terminals. The speakers
should be set up in a position where all the connections are out of sight and difficult to
touch - especially by children.

Children can be careless when they are playing, so please take this into account if you
intend using speaker stands or standing speakers on the floor. Either locate them
where they are safe from children, or take extra measures to prevent them falling over.
The spikes have very sharp points! To avoid injury please handle them with extreme
care, and keep them well away from children.
All manuals and user guides at all-guides.com
23