Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick start guide CellaTemp PT
Preparing the pyrometer for measurements
EN
Diopter compensation
Brightness control to protect the eye
Focusing the pyrometer
Aligment the pyrometers
Direct the CellaPort to the object to be measured. The measurement
should take place at an angle of 90 ° to the measuring object. The angle
should not be less than 45 ° from the vertical. When measuring with a
two-colour pyrometer, the field of view does not have to be filled entirely
by the target object. There might even be particles like dust, steam and
The pyrometer offers diopter compensation
to adjust the sighting device to the user's vi-
sion. Turn the ring until you see a sharp im-
age of the target spot indication in the view-
finder.
Instruments with a measuring range of
> 2000 °C are equipped with a polarisation
filter to control brightness and protect the
user's eye.
The pyrometer is equipped with focusable
optics. Turn the lens until the target object
and the target marker (distinctly marked in
the viewfinder) both appear in sharp focus
simultaneously
Werbung
